W25Q256JVFIQ存储IC，华邦一级现货商，原装正品

W25Q256JVFIQ简介

The W25Q256JV (256M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. All devices are offered in space-saving packages. The W25Q256JV array is organized into 131,072 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q256JV has 8,192 erasable sectors and 512 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. The W25Q256JV supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2, and I/O3. SPI clock frequencies of W25Q256JV of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP Register, a 64- bit Unique Serial Number and three 256-bytes Security Registers.

W25Q256JVFIQ参数

  New Family of SpiFlash Memories

– W25Q256JV: 256M-bit / 32M-byte

– Standard SPI: CLK, /CS, DI, DO

– Dual SPI: CLK, /CS, IO0, IO1,

– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3

– 3 or 4-Byte Addressing Mode

– Software & Hardware Reset(1)

  Highest Performance Serial Flash

– 133MHz Standard/Dual/Quad SPI clocks

– 266/532MHz equivalent Dual/Quad SPI

– 66MB/S continuous data transfer rate

– Min. 100K Program-Erase cycles per sector

– More than 20-year data retention

  Efficient “Continuous Read”

– Quad Peripheral Interface

– Allows true XIP (execute in place) operation

– Outperforms X16 Parallel Flash

  Low Power, Wide Temperature Range

– Single 2.7 to 3.6V supply

–<1µA Power-down (typ.)

– -40°C to +85°C operating range

– -40°C to +105°C operating range

  Flexible Architecture with 4KB sectors

– Uniform Sector/Block Erase (4K/32K/64K-Byte)

– Program 1 to 256 byte per programmable page

– Erase/Program Suspend & Resume

  Advanced Security Features

– Software and Hardware Write-Protect

– Power Supply Lock-Down

– Special OTP protection

– Top/Bottom, Complement array protection

– Individual Block/Sector array protection

– 64-Bit Unique ID for each device

– Discoverable Parameters (SFDP) Register

– 3X256-Bytes Security Registers with OTP locks

– Volatile & Non-volatile Status Register Bits

  Space Efficient Packaging(2)

– 8-pad WSON 8x6-mm

– 8-pad WFLGA 6x5-mm

– 16-pin SOIC 300-mil (additional /Reset pin)

– 24-ball TFBGA 8x6-mm(additional /Reset pin)

– Contact Winbond for KGD and other options

W25Q256JVFIQ电路PCB封装图

W25Q256JVFIQ型号解析图