DSPIC33EP256MU806-E/PT
DSC with Dual Motor Control, Dual CAN & USB
Microchip’s dsPIC33E family of digital signal controllers (DSCs) features a 70 MIPS dsPIC® DSC core with integrated DSP and enhanced on-chip peripherals. These DSCs enable the design of high-performance, precision motor control systems that are more energy efficient, quieter in operation, have a great range and extended life. They can be used to control brushless DC, permanent magnet synchronous, AC induction and stepper motors. These devices are also ideal for high-performance general purpose applications.
Operating Conditions
3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
dsPIC33E Core
Modified Harvard Architecture
C Compiler Optimized Instruction Set
16-bit Wide Data Path
24-bit Wide Instructions
16x16 Integer Multiply Operations
32/16 and 16/16 Integer Divide Operations
11 Additional Instructions
Two 40-bit Accumulators with Rounding and Saturation Options
Flexible and Powerful Addressing modes
Single-Cycle Multiply and Accumulate
Single-Cycle shifts for up to 40-bit Data
16x16 Fractional Multiply/Divide Operations
Motor Control PWM
Two master time base modules can control dual 3-phase motors simultaneously
Up to seven PWM generators
Two PWM outputs per PWM generator
8.32 ns PWM resolution
Integrated Analog Features
Two independent ADC modules
One ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
One 10-bit ADC, 1.1 Msps with four S&H
Eight S&H using both ADC 10-bit modules
24 analog channels (64-pin devices) up to 32 analog channels (100/121/144-pin devices)
Flexible and independent ADC trigger sources
Up to three Analog Comparator modules with programmable 32 voltage points references
Timers / Capture / Compare / Standard PWM
9 16-bit Timers/Counters. Unused Output compares can be used as standard times for a total of 25 timers
16 Input Capture
16 Output Compare/ PWM
Hardware Real-Time Clock and Calendar
Peripheral Pin Select (PPS) to allow function remap
Communication Interfaces
USB 2.0 OTG-Compliant Full-Speed Interface
Four UART modules (15 Mbps), supporting LIN/J2602 protocols and IrDA®
Four 4-Wire SPI modules (15 Mbps)
Two ECAN™ modules (1 Mbaud) CAN 2.0B Support
Two I2C modules (up to 1 Mbaud) with SMBus Support
Data Converter Interface (DCI) module with Support for I2S and Audio Codecs
PPS to allow Function Remap
Parallel Master Port (PMP)
Qualification and Class B Support
AEC-Q100 Grade 1 (-40ºC to +125ºC)
AEC-Q100 Grade 0 (-40ºC to +150ºC)
Class B Safety Library, IEC 60730
Parametrics
| CPU Type | dsPIC® DSC |
| CPU Speed (MHz) | 70 |
| Program Memory Size (KB) | 256 |
| Multiple Flash Panels | Yes |
| Direct Memory Access (DMA) Channels | 15 |
| Temp. Range Min.(C°) | -40 |
| Temp. Range Max.(C°) | 125 |
| Operation Voltage Min.(V) | 3 |
| Operation Voltage Max.(V) | 3.6 |
| Pin Count | 64 |
| Low Power | No |
| Number of Comparators | 3 |
| Number of ADCs | 2 |
| ADC Channels | 24 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 1100 |
| Number of DACs | 1 |
| DAC outputs | 0 |
| Max DAC Resolution (bits) | 4 |
| Hardware RTCC | No |
| Motor Control PWM Channels | 8 |
| SMPS PWM Channels | 0 |
| Number of PWM Time Bases | 3 |
| Output Compare Channels | 16 |
| USB Interface | FS Device/Host/OTG |
| Number of CAN Modules | 2 |
| Type of CAN module | CAN |
| Crypto Engine | No |
| Quadrature Encoder Interface (QEI) | 2 |
| Segment LCD | 0 |
| LCD/Graphics Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) | 0 |
| Peripheral Pin Select (PPS)/Pin Muxing | Yes |
