ENC28J60T-I/ML
10Base-T Ethernet Controller with SPI Interface
Microchip's ENC28J60 is a 28-pin, 10BASE-T stand alone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. With a small foot print package size the ENC28J60 minimizes complexity, board space and cost. Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation.
• Programmable wake-up on multiple packet formats, including Magic Packet®, Unicast, Multicast, Broadcast, specific packet match or any packet
Parametrics
Comments | 10Base-T Ethernet Controller |
Ethernet Bandwidth | 10Mbps |
TX/RX RAM Buffer(Bytes) | 8K |
Interrupt Pin | 1 |
LEDs | 2 |
Op. Voltage (V) | 0 |
# Ethernet Ports | 1 |
Temp Range Min | -40 |
Temp Range Max | 85 |
Max Speed | 25Mhz |
# of Ether Ports | 0 |
Fiber Support | No |
Interface | SPI |
Supply voltage (V) | 0 |
Vdd I/O (V) | 3.3 |
LinkMD Cable Diag | No |
ESD Rating (KV) | 0 |
WOL | No |
Largets Pkt-Size Bytes | 0 |
# of VLAN | 0 |

ENC28J60T-I/ML
带 SPI 接口的 10Base-T 以太网控制器
Microchip 的 ENC28J60 是一款 28 引脚 10BASE-T 独立以太网控制器,具有板载 MAC 和 PHY、8 KB 缓冲区 RAM 和 SPI 串行接口。ENC28J60 采用小尺寸封装,最大限度地降低了复杂性、电路板空间和成本。目标应用包括 VoIP、工业自动化、楼宇自动化、家庭控制、安全和仪器仪表。
• 多种数据包格式的可编程唤醒,包括Magic Packet®、单播、组播、广播、特定数据包匹配或任何数据包
• 在用户定义的偏移量处,数据包内最多 64 字节的可编程模式匹配
• 封装:SOIC- SPDIP- SSOP- QFN (6x6 mm)
参数化
评论 | 10Base-T 以太网控制器 |
以太网带宽 | 10Mbps |
TX/RX RAM 缓冲区(字节) | 8K |
中断引脚 | 1 |
LED | 2 |
操作。电压(伏) | 0 |
# 以太网端口 | 1 |
最低温度范围 | -40 |
最大温度范围 | 85 |
最大速度 | 25兆赫 |
以太网端口数量 | 0 |
光纤支持 | 不 |
界面 | SPI |
电源电压(V) | 0 |
电压输入/输出 (V) | 3.3 |
LinkMD 电缆诊断 | 不 |
静电放电等级 (KV) | 0 |
网络电话 | 不 |
较大的 Pkt 大小字节 | 0 |
VLAN 数量 | 0 |
