KSZ8041RNLI-TR
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data. A unique mixed signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables. The KSZ8041FTL also includes support for 100Base-FX fiber media.
The KSZ8041NL supports MII and RMII with 50MHz input clock. The KSZ8041RNL supports only RMII with 50MHz output clock. The KSZ8041TL supports MII, SMII and RMII with 50MHz input clock. The KSZ8041FTL adds 100Base-FX support to the KSZ8041TL feature set. The KSZ8041MLL supports only MII.
The KSZ8041NL and KSZ8041RNL are available in 32-pin, lead-free QFN packages. The KSZ8041TL and KSZ8041FTL are available in 48-pin, lead-free TQFP packages. The KSZ8041MLL is provided in the 48-pin, lead-free LQFP package.
KSZ8041是一款单电源10Base-T/100Base-TX物理层收发器，提供MII/RMII/SMII接口来发送和接收数据。独特的混合信号设计延长了信号传输距离，同时降低了功耗。HP Auto MDI/MDI-X提供了最强大的解决方案，无需区分交叉电缆和直通电缆。KSZ8041FTL还支持100Base-FX光纤介质。
KSZ8041NL支持50MHz输入时钟的MII和RMII。KSZ8041RNL仅支持50MHz输出时钟的RMII。KSZ8041TL支持MII、s MII和RMII的50MHz输入时钟。KSZ8041FTL为KSZ8041TL功能集增加了100Base-FX支持。KSZ8041MLL仅支持MII。
KSZ8041NL和KSZ8041RNL采用32引脚无铅QFN封装。KSZ8041TL和KSZ8041FTL采用48引脚无铅TQFP封装。KSZ8041MLL采用48引脚无铅LQFP封装。
Product Features 产品特性
- Single-chip 10Base-T/100Base-TX physical layer solution
- Fully compliant to IEEE 802.3u Standard
- Power consumption of <180mW
- Power down and power saving modes
- Built-in 1.8V regulator for core
- Single power supply (3.3V)
- HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
- Robust operation over standard cables
- MII interface support (except KSZ8041RNL)
- RMII interface with external 50MHz system clock (KSZ8041NL, or KSZ8041TL/FTL)
- RMII interface with 25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)
- SMII interface with external 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)
- Fiber support 100Base-FX (KSZ8041FTL only)
- MIIM (MDC/MDIO) management bus to 6.25MHz for rapid PHY register configuration
- Interrupt pin option
- Programmable LED outputs for link, activity and speed
- ESD rating (6kV)
- 32-pin QFN (5mm x 5mm)
- 48-pin LQFP (KSZ8041MLL)
- 48-pin TQFP (KSZ8041TL/FTL)
- 单芯片10Base-T/100Base-TX物理层解决方案
- 完全符合IEEE 802.3u标准
- 功耗< 180兆瓦
- 掉电和省电模式
- 内核内置1.8V稳压器
- 单电源(3.3V)
- HP auto MDI/MDI-X通过禁用和启用选项对直通电缆和交叉电缆进行可靠的检测和校正
- 标准电缆上的稳定运行
- MII接口支持(KSZ8041RNL除外)
- 与外部50MHz系统时钟(KSZ8041NL或KSZ8041TL/FTL)的RMII接口
- RMII接口，25MHz晶振/时钟输入和50MHz参考时钟输出至MAC (KSZ8041RNL)
- SMII接口，具有外部125MHz系统时钟和来自MAC的12.5MHz同步时钟(仅适用于KSZ8041TL/FTL)
- 光纤支架100Base-FX(仅限KSZ8041FTL)
- MIIM (MDC/MDIO)管理总线至6.25MHz，用于快速PHY寄存器配置
- 中断引脚选项
- 链接、活动和速度的可编程LED输出
- ESD额定值(6kV)
- 32针QFN(5毫米x 5毫米)
- 48引脚LQFP封装(KSZ8041MLL)
- 48针TQFP (KSZ8041TL/FTL)
KSZ8041RNLI-TR
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data. A unique mixed signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables. The KSZ8041FTL also includes support for 100Base-FX fiber media.
The KSZ8041NL supports MII and RMII with 50MHz input clock. The KSZ8041RNL supports only RMII with 50MHz output clock. The KSZ8041TL supports MII, SMII and RMII with 50MHz input clock. The KSZ8041FTL adds 100Base-FX support to the KSZ8041TL feature set. The KSZ8041MLL supports only MII.
The KSZ8041NL and KSZ8041RNL are available in 32-pin, lead-free QFN packages. The KSZ8041TL and KSZ8041FTL are available in 48-pin, lead-free TQFP packages. The KSZ8041MLL is provided in the 48-pin, lead-free LQFP package.
KSZ8041是一款单电源10Base-T/100Base-TX物理层收发器，提供MII/RMII/SMII接口来发送和接收数据。独特的混合信号设计延长了信号传输距离，同时降低了功耗。HP Auto MDI/MDI-X提供了最强大的解决方案，无需区分交叉电缆和直通电缆。KSZ8041FTL还支持100Base-FX光纤介质。
KSZ8041NL支持50MHz输入时钟的MII和RMII。KSZ8041RNL仅支持50MHz输出时钟的RMII。KSZ8041TL支持MII、s MII和RMII的50MHz输入时钟。KSZ8041FTL为KSZ8041TL功能集增加了100Base-FX支持。KSZ8041MLL仅支持MII。
KSZ8041NL和KSZ8041RNL采用32引脚无铅QFN封装。KSZ8041TL和KSZ8041FTL采用48引脚无铅TQFP封装。KSZ8041MLL采用48引脚无铅LQFP封装。
Product Features 产品特性
- Single-chip 10Base-T/100Base-TX physical layer solution
- Fully compliant to IEEE 802.3u Standard
- Power consumption of <180mW
- Power down and power saving modes
- Built-in 1.8V regulator for core
- Single power supply (3.3V)
- HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
- Robust operation over standard cables
- MII interface support (except KSZ8041RNL)
- RMII interface with external 50MHz system clock (KSZ8041NL, or KSZ8041TL/FTL)
- RMII interface with 25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)
- SMII interface with external 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)
- Fiber support 100Base-FX (KSZ8041FTL only)
- MIIM (MDC/MDIO) management bus to 6.25MHz for rapid PHY register configuration
- Interrupt pin option
- Programmable LED outputs for link, activity and speed
- ESD rating (6kV)
- 32-pin QFN (5mm x 5mm)
- 48-pin LQFP (KSZ8041MLL)
- 48-pin TQFP (KSZ8041TL/FTL)
- 单芯片10Base-T/100Base-TX物理层解决方案
- 完全符合IEEE 802.3u标准
- 功耗< 180兆瓦
- 掉电和省电模式
- 内核内置1.8V稳压器
- 单电源(3.3V)
- HP auto MDI/MDI-X通过禁用和启用选项对直通电缆和交叉电缆进行可靠的检测和校正
- 标准电缆上的稳定运行
- MII接口支持(KSZ8041RNL除外)
- 与外部50MHz系统时钟(KSZ8041NL或KSZ8041TL/FTL)的RMII接口
- RMII接口，25MHz晶振/时钟输入和50MHz参考时钟输出至MAC (KSZ8041RNL)
- SMII接口，具有外部125MHz系统时钟和来自MAC的12.5MHz同步时钟(仅适用于KSZ8041TL/FTL)
- 光纤支架100Base-FX(仅限KSZ8041FTL)
- MIIM (MDC/MDIO)管理总线至6.25MHz，用于快速PHY寄存器配置
- 中断引脚选项
- 链接、活动和速度的可编程LED输出
- ESD额定值(6kV)
- 32针QFN(5毫米x 5毫米)
- 48引脚LQFP封装(KSZ8041MLL)
- 48针TQFP (KSZ8041TL/FTL)
