宝星微科技原装现货

The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs in a small footprint.

They are designed to enable a new generation of low port count, cost-sensitive and power efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS features (e.g., IPv6 priority classification support) make these devices ideal for IPTV, IP-STB, VoIP, automotive and industrial applications.

The KSZ8863 family is designed to support the GREEN requirement in today’s switch systems. Advanced power management schemes include software power down, per port power down and the energy detect mode that shuts downs the transceiver when a port is idle. KSZ8863MLL/FLL/RLL also offer a by-pass mode which enables system-level power saving. In this mode, the processor connected to the switch through the MII interface can be shut down without impacting the normal switch operation.

 The configurations provided by the KSZ8863 family enables the flexibility to meet requirements of different applications:

KSZ8863MLL: Two 10/100BASE-T/TX transceivers and one MII interface.
KSZ8863RLL: Two 10/100BASE-T/TX transceivers and one RMII interface.
KSZ8863FLL: One 100BASE-FX, one 10/100BASE-T/TX transceivers and one MII interface.

The device is available in RoHS-compliant 48-pin LQFP package. Industrial-grade and Automotive-grade are also available.

Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

宝星微科技原装现货

KSZ8863MLL/FLL/RLL 是高度集成的 3 端口开关 IC，占地面积小。

它们旨在实现新一代低端口数、对成本敏感且节能的 10/100Mbps 交换机系统。低功耗、先进的电源管理和复杂的 QoS 功能（例如，IPv6 优先级分类支持）使这些设备成为 IPTV、IP-STB、VoIP、汽车和工业应用的理想选择。

KSZ8863 系列旨在支持当今开关系统中的绿色要求。高级电源管理方案包括软件断电、每端口断电和在端口空闲时关闭收发器的能量检测模式。KSZ8863MLL/FLL/RLL 还提供旁路模式，可实现系统级省电。在这种模式下，可以关闭通过 MII 接口连接到交换机的处理器，而不会影响交换机的正常运行。

 KSZ8863 系列提供的配置可灵活满足不同应用的要求：

KSZ8863MLL：两个 10/100BASE-T/TX 收发器和一个 MII 接口。
KSZ8863RLL：两个 10/100BASE-T/TX 收发器和一个 RMII 接口。
KSZ8863FLL：1个100BASE-FX、1个10/100BASE-T/TX收发器和1个MII接口。

该器件采用符合 RoHS 标准的 48 引脚 LQFP 封装。还提供工业级和汽车级。

Microchip 的免费和保密的 LANCheck® 在线设计审查服务适用于选择我们的产品进行应用设计的客户。LANCheck 在线设计审查服务 受 Microchip 的 计划条款和条件约束 ，并且需要 myMicrochip 帐户。