KSZ9563RNXI
The KSZ9563 is a highly-integrated, IEEE 802.3 compliant networking device that incorporates a layer-2+ managed Gigabit Ethernet switch, two 10BASE-T/100BASE-TX/1000BASE-T physical layer transceivers (PHYs) and associated MAC units, and one MAC port with a configurable RGMII/MII/RMII interface for direct connection to a host processor/ controller, another Ethernet switch, or an Ethernet PHY transceiver. KSZ9563 also implements IEEE 1588v2 Precision Timing Protocol.
Full register access is available by SPI or I2C interfaces, and by optional in-band management via any of the data ports. PHY register access is provided by a MIIM interface.
Security features include support for IEEE 802.1X port-based authentication and Access Control List (ACL) filtering.
An assortment of power-management features including Energy-Efficient Ethernet (EEE) have been designed in to satisfy energy efficient environments.
KSZ9563是一款高度集成的IEEE 802.3兼容网络设备,集成了一个第2层以上管理的千兆以太网交换机、两个10BASE-T/100BASE-TX/1000BASE-T物理层收发器(PHY)和相关MAC单元,以及一个MAC端口,该端口带有可配置的RGMII/MII/RMII接口,可直接连接到主机处理器/控制器、另一个以太网交换机或以太网PHY收发器。KSZ9563还实现了IEEE 1588v2精确定时协议。
SPI或I提供完整的寄存器访问2c接口,并通过任何数据端口进行可选的带内管理。PHY寄存器访问由MIIM接口提供。
安全特性包括支持IEEE 802.1X基于端口的身份验证和访问控制列表(ACL)过滤。
包括节能以太网(EEE)在内的各种电源管理功能旨在满足高能效环境的需求。
Product Features 产品特性
EtherSync®- IEEE 1588 v2 PTP
- One-step Operation
- Transparent Clock (TC) with auto correction update
- Master and slave Ordinary Clock (OC) support
- End-to-end (E2E) or peer-to-peer (P2P)
- PTP multicast and unicast message support
- PTP message transport over IPv4/v6 and IEEE 802.3
- IEEE 1588v2 PTP packet filtering
Advanced Switch Capabilities- IEEE 802.1Q VLAN support for 128 active VLAN groups and the full range of 4096 VLAN IDs
- IEEE 802.1p/Q tag insertion/removal on per port basis
- VLAN ID on per port or VLAN basis
- IEEE 802.3x full-duplex flow control and half-duplex back pressure collision control
- IEEE 802.1X (Port-Based Network Access Control)
- IGMP v1/v2/v3 snooping for multicast packet filtering
- IPv6 multicast listener discovery (MLD) snooping
- IPv4/IPv6 QoS support, QoS/CoS packet prioritization
- 802.1p QoS packet classification with 4 priority queues
- Programmable rate limiting at ingress/egress ports
Switch Management Capabilities- 10/100Mbps Ethernet switch basic functions: frame buffer management, address look-up table, queue management, MIB counters
- Non-blocking store-and-forward switch fabric assures fast packet delivery by utilizing 4096 entry forwarding table with 128kByte frame buffer
- Jumbo packet support up to 9000 bytes
- Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port
- Rapid spanning tree protocol (RSTP) support for topology management and ring/linear recovery
- Multiple spanning tree protocol (MSTP) support
Two Robust Integrated PHY Ports- 1000BASE-T/100BASE-TX/10BASE-T IEEE 802.3
- LinkMD®+ receive signal quality indicator
- Fast Link-up option significantly reduces link-up time
- Auto-negotiation and Auto-MDI/MDI-X support
- Energy-Efficient Ethernet (EEE) support with low-power idle mode and clock stoppage
- On-chip termination resistors and internal biasing for differential pairs to reduce power
- LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Parametrics 参数化
Ethernet Bandwidth | 10/100/1000Mbps |
Interrupt Pin | Yes |
Op Voltage | 3.3 |
# Ethernet Ports | 3 |
Interface | MII/RMII/RGMII |
IOPins | 6 |
IEEE1588 | Yes |
Temp Range Min | -40 |
Temp Range Max | 85 |
Managed | Yes |
Copper Support | 10/100/1000 (2) |
Fiber Support | No |
Supply Voltage (V) | 3.3 |
Internal LDO | No |
Vdd I/O (V) | 1.8/2.5/3.3 |
LinkMD Cable Diag | Yes |
On-Chip Termination | Yes |
ESD Rating (KV) | 6 |
Smart Power Adjust | Yes |
Largest Pkt-Size Bytes | 9000 |
IPV6 | Yes |
Flow Ctrl | Yes |
Rate Limiting | Yes |
Rapid Spanning Tree | Yes |
Static MAC Addr | Yes |
以太网带宽 | 10/100/1000Mbps |
中断引脚 | 是 |
工作电压 | 3.3 |
#以太网端口 | 3 |
连接 | MII/RMII/RGMII |
碘平 | 6 |
IEEE1588 | 是 |
最小温度范围 | -40 |
最大温度范围 | 85 |
管理 | 是 |
铜支架 | 10/100/1000 (2) |
纤维支架 | 不 |
电源电压(V) | 3.3 |
内部LDO | 不 |
Vdd输入/输出(V) | 1.8/2.5/3.3 |
LinkMD电缆诊断 | 是 |
片上终端 | 是 |
ESD额定值(KV) | 6 |
智能功率调整 | 是 |
最大Pkt大小的字节 | 9000 |
IPV6 | 是 |
流量控制 | 是 |
限速 | 是 |
快速生成树 | 是 |
静态MAC地址 | 是 |

KSZ9563RNXI
The KSZ9563 is a highly-integrated, IEEE 802.3 compliant networking device that incorporates a layer-2+ managed Gigabit Ethernet switch, two 10BASE-T/100BASE-TX/1000BASE-T physical layer transceivers (PHYs) and associated MAC units, and one MAC port with a configurable RGMII/MII/RMII interface for direct connection to a host processor/ controller, another Ethernet switch, or an Ethernet PHY transceiver. KSZ9563 also implements IEEE 1588v2 Precision Timing Protocol.
Full register access is available by SPI or I2C interfaces, and by optional in-band management via any of the data ports. PHY register access is provided by a MIIM interface.
Security features include support for IEEE 802.1X port-based authentication and Access Control List (ACL) filtering.
An assortment of power-management features including Energy-Efficient Ethernet (EEE) have been designed in to satisfy energy efficient environments.
KSZ9563是一款高度集成的IEEE 802.3兼容网络设备,集成了一个第2层以上管理的千兆以太网交换机、两个10BASE-T/100BASE-TX/1000BASE-T物理层收发器(PHY)和相关MAC单元,以及一个MAC端口,该端口带有可配置的RGMII/MII/RMII接口,可直接连接到主机处理器/控制器、另一个以太网交换机或以太网PHY收发器。KSZ9563还实现了IEEE 1588v2精确定时协议。
SPI或I提供完整的寄存器访问2c接口,并通过任何数据端口进行可选的带内管理。PHY寄存器访问由MIIM接口提供。
安全特性包括支持IEEE 802.1X基于端口的身份验证和访问控制列表(ACL)过滤。
包括节能以太网(EEE)在内的各种电源管理功能旨在满足高能效环境的需求。
Product Features 产品特性
EtherSync®- IEEE 1588 v2 PTP
- One-step Operation
- Transparent Clock (TC) with auto correction update
- Master and slave Ordinary Clock (OC) support
- End-to-end (E2E) or peer-to-peer (P2P)
- PTP multicast and unicast message support
- PTP message transport over IPv4/v6 and IEEE 802.3
- IEEE 1588v2 PTP packet filtering
Advanced Switch Capabilities- IEEE 802.1Q VLAN support for 128 active VLAN groups and the full range of 4096 VLAN IDs
- IEEE 802.1p/Q tag insertion/removal on per port basis
- VLAN ID on per port or VLAN basis
- IEEE 802.3x full-duplex flow control and half-duplex back pressure collision control
- IEEE 802.1X (Port-Based Network Access Control)
- IGMP v1/v2/v3 snooping for multicast packet filtering
- IPv6 multicast listener discovery (MLD) snooping
- IPv4/IPv6 QoS support, QoS/CoS packet prioritization
- 802.1p QoS packet classification with 4 priority queues
- Programmable rate limiting at ingress/egress ports
Switch Management Capabilities- 10/100Mbps Ethernet switch basic functions: frame buffer management, address look-up table, queue management, MIB counters
- Non-blocking store-and-forward switch fabric assures fast packet delivery by utilizing 4096 entry forwarding table with 128kByte frame buffer
- Jumbo packet support up to 9000 bytes
- Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port
- Rapid spanning tree protocol (RSTP) support for topology management and ring/linear recovery
- Multiple spanning tree protocol (MSTP) support
Two Robust Integrated PHY Ports- 1000BASE-T/100BASE-TX/10BASE-T IEEE 802.3
- LinkMD®+ receive signal quality indicator
- Fast Link-up option significantly reduces link-up time
- Auto-negotiation and Auto-MDI/MDI-X support
- Energy-Efficient Ethernet (EEE) support with low-power idle mode and clock stoppage
- On-chip termination resistors and internal biasing for differential pairs to reduce power
- LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Parametrics 参数化
Ethernet Bandwidth | 10/100/1000Mbps |
Interrupt Pin | Yes |
Op Voltage | 3.3 |
# Ethernet Ports | 3 |
Interface | MII/RMII/RGMII |
IOPins | 6 |
IEEE1588 | Yes |
Temp Range Min | -40 |
Temp Range Max | 85 |
Managed | Yes |
Copper Support | 10/100/1000 (2) |
Fiber Support | No |
Supply Voltage (V) | 3.3 |
Internal LDO | No |
Vdd I/O (V) | 1.8/2.5/3.3 |
LinkMD Cable Diag | Yes |
On-Chip Termination | Yes |
ESD Rating (KV) | 6 |
Smart Power Adjust | Yes |
Largest Pkt-Size Bytes | 9000 |
IPV6 | Yes |
Flow Ctrl | Yes |
Rate Limiting | Yes |
Rapid Spanning Tree | Yes |
Static MAC Addr | Yes |
以太网带宽 | 10/100/1000Mbps |
中断引脚 | 是 |
工作电压 | 3.3 |
#以太网端口 | 3 |
连接 | MII/RMII/RGMII |
碘平 | 6 |
IEEE1588 | 是 |
最小温度范围 | -40 |
最大温度范围 | 85 |
管理 | 是 |
铜支架 | 10/100/1000 (2) |
纤维支架 | 不 |
电源电压(V) | 3.3 |
内部LDO | 不 |
Vdd输入/输出(V) | 1.8/2.5/3.3 |
LinkMD电缆诊断 | 是 |
片上终端 | 是 |
ESD额定值(KV) | 6 |
智能功率调整 | 是 |
最大Pkt大小的字节 | 9000 |
IPV6 | 是 |
流量控制 | 是 |
限速 | 是 |
快速生成树 | 是 |
静态MAC地址 | 是 |
